Mechanical Seal Repair
Mechanical Seal Repair provided by Industry Packing & Seal, Inc.
- Mechanical seal repair is available on most seals from all seal manufacturers including but not limited to John Crane, Flowserve, Chesterton, PPC, AES, Delta, Flex-A-Seal, Burgmann, Robco, Sepco, Utex and many more.
- A failure analysis is performed on every seal to determine why the seal failed. We will always make any necessary suggestions that will lead to increased seal life.
- All seal components are completely cleaned, measured, pressure tested, and inspected to determine which parts can be re-used, or require replacement.
- Seal faces are lapped to within industry standards (2 light bands).
- Seal design and or materials can be upgraded as needed depending upon an engineered review of the seal application or by customer request.
- Upon final assembly all seals are again inspected.
- All mechanical seals, including single cartridges that are repaired in our facility are pressure tested before they are returned to the customer.
Industrial Sales & Services
| Mechanical Seal Repair – All Manufacturers Repaired – Quick Turn-Around – Engineered Failure Analysis – All Seals Pressure Tested |
Lapping Services – Specialty lapping – All shapes and sizes – Tungsten, Silicon, Ceramic, Carbon, all Steels |
Wear Parts – Specialty Castings – Specialty Plastics – Pump Parts |
